The recently purchased Grizzly bandsaw arrived pre-wired for 220v, and is rated 10A at 220v. To use it initially I had to rewire it for 110v, but at 20A, it’s just too inefficient to use on a regular basis. The long put…
Overview Our Comfort Maker furnace (Model FBF100F14A4) starting acting odd at the end of last winter; when the ignitor would start the pilot, the control module would click twice and that clicking became slower and slower as the winter progressed. …
How To: Fix the issue that causes water to accumulate under the deli drawer Symptom: Water starts to accumulate on the bottom of the refrigerator, underneath the deli drawer; it will begin to drip down into the freezer as well. The…
Woodworking in the garage has many challenges, space and lack of airflow are two at the top of my list. Another is cleanup. There’s not too much that can be done about space, and I’m stuck with the airflow situation. …
We have a builder-grade furnace that came with our house (a Comfort Maker FBF100F14A4). It’s terribly inefficient, on 80%, and the quality is not so great either. One component that has to be replaced routinely is the “Furnace Vent Combustion Draft…